Delta 36-070 Instruction Manual download pdf (Page 12)

1. Your miter saw has the capacity to cut standard 2 x

4’s laying flat or on edge, at the 45 degree right and left

miter angles as shown in Figs. 26 and 27.

2. A standard 2 x 6 can easily be cut in the 90 degree

straight cut-off position in one pass, as shown in Fig. 28.

3. Cutting a standard 4 x 4 is easily accomplished with

your miter saw in one pass, as shown in Fig. 29.

Fig. 26

Fig. 27

Fig. 28

Fig. 29

GENERAL CUTTING OPERATIONS

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 20 21

No comments

Delta 36-070 Instruction Manual Page 12