STATIONARY POWER TOOLS
50
649
14" Woodworking
Band Saw
• Cutting capacity (height): 6"
• Cutting capacity (width): 13-1/2"
• Minimum saw blade width: 1/8"
• Maximum saw blade width: 3/4"
• Saw blade length: 93-1/2"
• Table size: 15 x 15"
• Table tilt right and left: 45° R x 10° L
• Closed stand type
• Dust chute diameter: 2" O.D.
• Dimensions: 68" H x 26" W x 19" D
• Blade speed : 3,000 sfpm
• Standard equipment includes upper blade guide micro
adjustments, V-groove blade guide bar, graphite-impreg-
nated polymer JET Blocks
™
in the blade guides, extra
large offset 15 x 15" cast iron work table, 3/8" woodwork-
ing blade, 6 teeth per inch and built-in dust chute
Order No. Mfg. No. Motor Voltage
5009.00227 250142 1 HP 115/230 V, Single phase
14" Band Saws
14" Wood Cutting Band Saw with wheel
and blade guards, belt guard, chip
chute, 4-5/8" arbor pulley, 49-035 V-belt,
41-033 motor pulley (with 5/8" bore),
blade guides and 28-034 wood cutting
blade.
Shown with enclosed steel stand.
Comes without stand, motor or switch;
must order separately.
Order No. Mfg. No. Motor Voltage
14” BAND SAW WITHOUT STAND
5009.00200 28-203 1 HP 230V, Single Phase
Includes:
5009.00203 49-035 V-Belt
5009.00206 41-033 Motor Pulley, 5/8” bore
5009.00209 28-034 Wood Cutting Blade
14” BAND SAW WITH BASIC OPEN STEEL STAND
5009.00212 28-275 3/4 HP 115V, Single Phase
14” BAND SAW WITH ENCLOSED STEEL STAND
5009.00215 28-280 1 HP 115/230V, Single Phase
5009.00218 52-965 Enclosed Steel Stand
20" Wood Cutting
Band Saws
20" Wood Cutting Band Saw icludes
motor with push-button station; magnet-
ic starter, transformer and overload pro-
tection; blade brake, 3” OD dust chute,
wheel brush, tilting table, rip fence with
guide bar, adjustable blade guides, 1/2”
blade and instruction manual.
Order No. Mfg. No. Motor Voltage
20” WOOD CUTTING BAND SA W
5009.00221 28-640 2 HP 230V, Single Phase
5009.00224 28-641 2 HP 230/460V, Three Phase
• 15º left, 45º right 14" square tilting table
• Dust chute
• Induction motor, blade and mitre gauge
• Comes with open stand
• Cutting Capacity Frame to Blade: 13-
5/8"
• Motor: 7.5 amp
• Voltage: 110V, 1 phase, 60 Hz
• Speed: 2760 sfpm
Order No. Mfg. No. Amps Blade (in) Weight (lb)
5009.00230 KC-1401HD 7.5 .025 x .5 x 93 150
Order No. Mfg. No. Amps Blade (in) Weight (lb)
5009.00233 WA-1403C 10 .025 x .5 x 93 210
Wood Band Saw
Wood Bandsaw
• 10° left, 45° right, 16" square
tilting table
• Hinged doors
• Quick connect motor to switch
plug for easy set-up
• Triple ball bearing guides on
top and bottom
• Comes with induction motor,
blade, miter gauge, and cabi-
net stand
• Cutting Capacity Frame to Blade:
13-5/8"
• Motor: 10 amp
• Voltage: 110V/220V, 1 phase, 60 Hz; pre-wired at 110V
28-640
Comments to this Manuals