Delta Digital timer User's Guide download pdf (Page 10)

HELPLINE No. U K / N.IRELAND 0800 328 6020 REP. IRELAND 00800 4467 5888

WEB SUPPORT [email protected] GT-ZSd-02

2. Press M.

The activation time is deleted, the display shows

--:--.

3. Again press +.

The deactivation time of the selected programme flashes in the display.

4. Press M.

The deactivation time is deleted, the display shows

--:--.

5. Finally, press or wait some seconds until the timer switch has switched back to time mode

automatically.

OTHER FUNCTIONS

Using the random function

The timer switch has an implemented random generator. With this setting, a connected consumer

(e.g. a lamp) is automatically switched on and off at random intervals in an offset of up to 30

minutes to the programmed time.

Only those programmed times are taken into account, at which the consumer is activated for more

than 30 minutes. The duty cycle is not changed by the random function.

Example:

Normally, the timer switch would switch on at 13:00 and switch off again at 14:00. Due to the

random function, there is time offset, though. Thus, the timer switch may switch on at 13:12 and

switch off again at 14:12, for example.

- To activate the random function, the device is to be in time mode (shortly press

button once, if applicable).

- With the random function being active, the countdown function is functionless.

- Only if you programmed activation and deactivation times, the random function

operates.

1. Press RANDOM to activate this function.

The display shows .

2. To quit the random function, again press RANDOM.

is no longer visible in the display.

E43247 Digitale Zeitschaltuhr Innen Aldi UK.book Seite 10 Dienstag, 20. Juli 2010 3:07 15

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

No comments

Delta Digital timer User's Guide Page 10