Delta 36-220 Instruction Manual download pdf (Page 5)

OPERATING INSTRUCTIONS

FOREWORD

Delta Model 36-220 is a 10" Compound Miter Saw designed to cut wood. It can crosscut up to 2-

/4" x 5-

/8", miter at

45° both left and right 2-

/4" x 3-

/2", bevel at 45° left 1-

/4" x 5-

/8", and compound 45° x 45°, 1-

/4" x 3-

/2". It has miter

stops at 0°, 15°, 22.5°, 30°, and 45° degrees both left and right, and positive bevel stops at 0° and 45° left. It also

includes the following features; Double Insulated construction for operator safety, D-handle design with trigger switch

for positive control, lock-out button to prevent accidental starts, Electric brake automatically stops blade in seconds,

Automatic retracting see-thru blade guard, Built-in arbor lock for easy single wrench blade changes, Dust bag, Work

supports, Extra-wide fence and Replaceable cut-thru table insert for optimum chipbreaking.

UNPACKING

Remove the miter saw and all loose items from the carton. IMPORTANT: DO NOT LIFT THE MITER SAW BY THE

SWITCH HANDLE OR TABLE CONTROL HANDLE AS THIS MAY CAUSE MISALIGNMENT. ALWAYS LIFT THE

MACHINE BY THE BASE.

WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE MITER SAW TO THE POWER SOURCE

UNTIL THE MACHINE IS COMPLETELY ASSEMBLED AND YOU HAVE READ AND UNDERSTOOD THE

ENTIRE OWNER’S MANUAL.

ASSEMBLY INSTRUCTIONS

WARNING: MAKE CERTAIN THE POWER CORD IS DISCONNECTED FROM THE POWER SOURCE

DURING THE COMPLETE ASSEMBLY PROCEDURE.

Fig. 1

1 2 3 4 5 6 7 8 9 10 ... 22 23

No comments

Delta 36-220 Instruction Manual Page 5