Delta 36-220 Instruction Manual download pdf (Page 9)

STARTING AND

STOPPING SAW

To turn the saw “ON” push in on switch lock key (A) Fig.

13, and depress switch trigger (B). To turn the saw “OFF”

release switch trigger (B).

Your compound miter saw is equipped with an automatic

electric blade brake. As soon as the switch trigger (B)

Fig. 13, is released, the electric brake is activated and

stops the blade in seconds.

WARNING: A TURNING SAW BLADE CAN BE

DANGEROUS. AFTER COMPLETING CUT, RELEASE

SWITCH TRIGGER TO ACTIVATE BLADE BRAKE.

KEEP SAW HEAD DOWN UNTIL BLADE HAS COME

TO A COMPLETE STOP.

WARNING: THE TORQUE DEVELOPED DURING

BRAKING MAY LOOSEN THE ARBOR SCREW. THE

ARBOR SCREW SHOULD BE CHECKED PERIOD-

ICALLY AND TIGHTENED IF NECESSARY.

Fig. 13

OPERATING CONTROLS

TABLE HAZARD AREA

WARNING: THE AREA INSIDE THE TWO RED LINES (A) FIG. BB, ON THE TABLE IS DESIGNATED AS A

HAZARD ZONE. NEVER PLACE YOUR HANDS INSIDE THIS AREA WHILE THE TOOL IS BEING OPERATED.

Fig. BB

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 22 23

No comments

Delta 36-220 Instruction Manual Page 9