Delta 100 Series Installation Manual download pdf (Page 51)

IQ 100 Series ((130/140/150) Meter

Programming the Meter Using the Front Panel

User and Installation Manual IM02601003E - September 2011 www.eaton.com 51

Using the Main Menu

1. Press the Menu button. The Main Menu screen appears.

• The Reset mode (rSt) appears in the A window. Use the Down button to scroll, causing

the Conguration (CFG) and Operating (OPr) modes to move to the A window.

• The mode that is currently ashing in the A window is the “Active” mode, which means it is the

mode that can be congured.

For example: Press Down Once- CFG moves to A window. Press Down Once - OPr moves to A window.

2. Press the Enter button from the Main Menu to view the parameters screen for the mode that is

currently active.

Using Reset Mode

Reset mode resets all of the Max and Min values in the meter.

NOTE: With the communication options, you can reset both the Max/Min values

and the energy accumulators. If you do not have a communication option,

you cannot reset the energy accumulator elds.

Press the Enter button while rSt is in the A window. The Reset All? No screen

appears.

• If you press the Enter button again, the Main Menu appears,

with the next mode in the A window. (The Down button

does not affect this screen.)

• If you press the Right button, the Reset All? YES screen appears.

Press Enter to reset the meter’s Max and Min values.

CAUTION! Reset All? YES resets all Max and Min values. Only press Enter

if this is what you want to do.

NOTE: If Password protection is enabled for Reset, you must

enter the four digit Password before you can reset the meter.

(See page 66 for information on Password Protection.)

To enter a password, follow the instructions on the next page.

Once you have performed a reset, the screen displays “rSt All donE” and then resumes auto-scrolling

parameters.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 93 94

No comments

Delta 100 Series Installation Manual Page 51