IQ 100 Series ((130/140/150) Meter
Programming the IQ 100 Series Meter Using Software
User and Installation Manual IM02601003E - September 2011 www.eaton.com 70
Using the IQ 100 Series Tools Menu
The Tools Menu allows you to access specic functions
for the IQ 100 Series Meter. Click Tools from the Title Bar
to display the Tools Menu.
Accessing the Device Prole Screen
Click the rst option, Edit Current Device Prole, to open
the Device Prole screen. This menu option performs the
same function as clicking the Prole icon in the Title Bar.
Reset Device Information
Click this option to reset either Max/Min values (IQ 130, IQ 140,
and IQ 150 meters) and/or Energy Accumulators (IQ 150 only).
You will see the screen shown on the right. Click the checkbox
next to the item(s) you want to reset.
Retrieve Device Status
Click this option to see the Device status screen for the meter. this is the same screen that displays
when you rst connect to the meter.
Flash Update Firmware
Click this option to upgrade the meter’s rmware. You will
see the screen on the right.
Click Browse to locate the ash le.
Click OK to update the rmware with the ash le. When
ashing is complete, click Exit to close the screen.
NOTE: Flash updating of rmware can only be done at a Baud
Rate of 57.6k.
Comments to this Manuals