ACC-36E Manual
ACC-36E Layout & Pinouts 69
J1 Bottom: ADC9 through ADC12
J1 Bottom: D-sub DA-15F
Mating: D-sub DA-15M
The ±12V output can be used for an external device (i.e. sensor).
The drawn current should not exceed 0.5 Amperes.
The common ground (pin #7) is tied to the digital ground of the
UMAC rack.
J2 Bottom: ADC13 through ADC16
J2 Bottom: D-sub DA-15F
Mating: D-sub DA-15M
The ±12V output can be used for an external device (i.e. sensor).
The drawn current should not exceed 0.5 Amperes.
The common ground (pin #7) is tied to the digital ground of the
UMAC rack.
Comments to this Manuals