Delta 4000 Instruction Manual download pdf (Page 39)

Delta Control User Interface

81331 Rev 01 Nov 2010

Voltage Control

The voltage control has three sections.

The top section is the voltmeter that shows the voltage in real time. Under the

voltmeter is a display showing the set voltage (target voltage). You can click on

this display to enter the target voltage or increase or decrease it using the buttons

in the centre control. Below the display area is a round control where you can

manually adjust voltage up or down. The single arrows step up or down in steps

of 100 volts while the buttons with two arrows steps up or down in steps of 1000

volts. The C button in the middle clears the selection.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 107 108

No comments

Delta 4000 Instruction Manual Page 39