Delta 36-953 Instruction Manual download pdf (Page 16)

Fig. 36

ASSEMBLING RIP FENCE

HOLDER BRACKETS

Assemble the rip fence holder brackets (A) and (B) Fig.

37, to the four holes located in the right hand side of the

saw cabinet using four #10 x 1/2" sheet metal screws

supplied.

Fig. 38

Fig. 37

ASSEMBLING DUST CHUTE

ADAPTER

The Unisaw is supplied with a dust chute connector to

provide a means of connecting a 4" diameter dust

collector hose to the machine. Align the four holes in the

dust chute adapter (A) Fig. 38,with the four holes in the

back of the motor cabinet (B) and attach the dust chute

adapter with four #10 x 1/2" sheet metal screws. NOTE:

DO NOT MOUNT THE DUST CHUTE ADAPTER

UNLESS A DUST COLLECTION SYSTEM IS USED IN

CONJUNCTION WITH THE SAW, AS THE DUST

CHUTE ADAPTER WILL RESTRICT THE GRAVITY

FEED OPENING FOR SAW DUST REMOVAL.

MITER GAGE HOLDER AND

WRENCH HOLDER

The miter gage (A) Fig.36, and arbor wrenches (B), can

be stored in the slots provided in the motor cover, as

shown in Fig. 36.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

No comments

Delta 36-953 Instruction Manual Page 16