Delta 28-185 Specifications download pdf (Page 14)

Fig.30

DUST CHUTE

A dust chute (A) Fig, 30, is supplied with your bench band

saw and is equipped with a 1-1/2" I.D. opening that can

easily be connected to a dust collection system.

Fig. 31

WRENCH HOLDER

A wrench holder (A) Fig. 31, is supplied on the back of the

saw frame to hold the adjusting wrench (B). The adjusting

wrench (B) is used for most of the adjustments on the band

saw, and the holder (A) enables you to store the wrench

with the saw and prevent the wrench from being lost.

BLADE AND

WHEEL BRUSH

A blade and wheel brush (A) Fig. 32, is supplied inside

the band saw frame to prevent sawdust and chips from

traveling with the blade. The brush can be adjusted by

loosening screw (B) and adjusting holder (A) closer to the

wheel. Then tighten screw (B).

Fig. 32

AAD m LTA

Delta Building Trades and Home Shop Machinery

Two Year Limited Warranty

Delta will repair or replace, at its expense and at its option, any Delta machine,

machine part, or machine accessory which in normal use has proven to be defective

in workmanship or material, provided that the customer returns the product

prepaid to a Delta factory service center or authorized service station with proof of

purchase of the product within two years and provides Delta with reasonable

opportunity to verify the alleged defect by inspection. Delta may require that

electric motors be returned prepaid to a motor manufacturer's authorized station

for inspection and repair or replacement. Delta will not be responsible for any

asserted defect which has resulted from normal wear, misuse, abuse or repair or

alteration made or specifically authorized by anyone other than an authorized Delta

service facility or representative. Under no circumstances will Delta be liable for

incidental or consequential damages resulting from defective products. This

warranty is Delia's sole warranty and sets forth the customer's exclusive remedy,

with respect to defective products; all other warranties, express or implied, whether

of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by

Delta.

Printed in U.S.A.

1 2 ... 9 10 11 12 13 14 15

No comments

Delta 28-185 Specifications Page 14