Delta 28-299A Instruction Manual download pdf (Page 5)

Use proper extension cords. Make sure your extension

cord is in good condition and is a 3-wire extension cord

which has a 3-prong grounding type plug and matching

receptacle which will accept the machine’s plug. When

using an extension cord, be sure to use one heavy

enough to carry the current of the machine. An under-

sized cord will cause a drop in line voltage, resulting in

loss of power and overheating. Fig. D, shows the correct

gauge to use depending on the cord length. If in doubt,

use the next heavier gauge. The smaller the gauge num-

ber, the heavier the cord.

EXTENSION CORDS

OPERATING INSTRUCTIONS

FOREWORD

Delta Models 28-241 and 28-299A are 14" Band Saws, equipped with a 1-1/2 HP, 120V guarded, drip-proof motor inside an

enclosed stand. Included with each saw is a push button switch, a blade and belt guard, an arbor and motor pulleys with a V-

belt, blade guides, a wood cutting blade, and an instruction manual.

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from

all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gaso-

line or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor

paste wax.

NOTICE: THE MANUAL COVER PHOTO ILLUSTRATES THE CURRENT PRODUCTION

MODEL. ALL OTHER ILLUSTRATIONS ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT

THE ACTUAL COLOR, LABELING OR ACCESSORIES AND MAY BE INTENDED TO ILLUS-

TRATE TECHNIQUE ONLY.

Fig. D

MINIMUM GAUGE EXTENSION CORD

RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES

Ampere Total Length Gauge of

Rating Volts of Cord in Feet Extension Cord

0-6 120

up to

25 18 AWG

0-6 120 25-50 16 AWG

0-6 120 50-100 16 AWG

0-6 120 100-150 14 AWG

6-10 120

up to

25 18 AWG

6-10 120 25-50 16 AWG

6-10 120 50-100 14 AWG

6-10 120 100-150 12 AWG

10-12 120

up to

25 16 AWG

10-12 120 25-50 16 AWG

10-12 120 50-100 14 AWG

10-12 120 100-150 12 AWG

12-16 120

up to

25 14 AWG

12-16 120 25-50 12 AWG

12-16 120

GREATER THAN 50 FEET NOT RECOMMENDED

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comments to this Manuals

No comments

Delta 28-299A Instruction Manual Page 5

Comments to this Manuals

Related products and manuals for Power tools Delta 28-299A