Delta 40-570 Instruction Manual download pdf (Page 5)

GROUNDING INSTRUCTIONS

WARNING: THIS TOOL MUST BE GROUNDED WHILE IN USE TO PROTECT THE OPERATOR

FROM ELECTRIC SHOCK.

1. All grounded, cord-connected tools:

In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce

the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and

a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

Do not modify the plug provided - if it will not fit the outlet, have the proper outlet installed by a qualified electrician.

Improper connection of the equipment-grounding conductor can result in risk of electric shock. The conductor with

insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor.

If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor

to a live terminal.

Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or

if in doubt as to whether the tool is properly grounded.

Use only 3-wire extension cords that have 3-prong grounding type plugs and 3-pole receptacles that accept the tool’s

plug.

Repair or replace damaged or worn cord immediately.

2. Grounded, cord-connected tools intended for use

on a supply circuit having a nominal rating less than 150

volts:

This tool is intended for use on a circuit that has an

outlet that looks like the one illustrated in Fig. 2. The tool

has a grounding plug that looks like the plug illustrated

in Fig. 2. A temporary adapter, which looks like the

adapter illustrated in Fig. 3, may be used to connect this

plug to a 2-pole receptacle as shown in Fig. 3 if a

properly grounded outlet is not available. The temporary

adapter should be used only until a properly grounded

outlet can be installed by a qualified electrician. The

green-colored rigid ear, lug, and the like, extending from

the adapter must be connected to a permanent ground

such as a properly grounded outlet box.

WARNING: IN ALL CASES, MAKE SURE THE

RECEPTACLE IN QUESTION IS PROPERLY

GROUNDED. NEVER REMOVE GROUNDING

PRONG FROM POWER PLUG.

NOTE: In Canada, the use of a temporary adapter

is not permitted by the Canadian Electric Code.

Fig. 2

GROUNDED OUTLET BOX

CURRENT

CARRYING

PRONGS

GROUNDING BLADE IS

LONGEST OF THE 3 BLADES

Fig. 3

GROUNDED OUTLET BOX

GROUNDING

MEANS

ADAPTER

1 2 3 4 5 6 7 8 9 10 ... 13 14

Comments to this Manuals

No comments

Delta 40-570 Instruction Manual Page 5

Comments to this Manuals

Related products and manuals for Power tools Delta 40-570