www.deltamachinery.com(800) 223-7278 - US(800) 463-3582 - CANADA10" Contractors Saw(Model 36-978/36-979)$ELTA,OGO0-3BLACK7HITELOGOWITH
10FASTENING SCROLL SAW TO SUPPORTING SURFACEThis scroll saw MUST be securely fastened to a stand or workbench using the three holes, two of w
11ADJUSTING BLADE TENSION Disconnect machine from power source.Tension is applied to the blade when the blade tension lever (A) Fig. 7, has been adjus
12TILTING THE TABLE Disconnect machine from power source.The table on your scroll saw can be tilted 45° to the left for bevel cutting operations by re
13Fig. 15ABCDFig. 16ABFig. 17ABADJUSTING HOLDDOWN Disconnect machine from power source.The holddown (A) Fig. 15, should be adjusted so it
14TABLE INSERT Disconnect machine from power source.The table insert (A) can be positioned in the saw table with the opening in the insert pointing to
15INSIDE CUTTINGInside cutting takes place when the blade is threaded through a hole in the workpiece. With your scroll saw, you can perform this oper
16CHANGING BLADES Disconnect machine from power source.1. Remove table insert (A) Fig. 22, and release blade tension by pulling tension lever (B) fo
175. Insert new blade (I) Fig. 26, into the upper blade holder (J) making certain the blade teeth are pointing down toward the table. Push upper bla
18REPLACEMENT PARTSUse only identical replacement parts. For a parts list or to order parts, visit our website at servicenet.deltamachinery.
The following are trademarks of PORTER-CABLE • DELTA (Las siguientes son marcas registradas de PORTER-CABLE • DELTA S.A.) (Les marques suivantes sont
TABLE OF CONTENTSRead and understand all warnings and operating instructions before using any tool or equipment. When using tools or equipment,
It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING
41. FOR YOUR OWN SAFETY, READ THE INSTRUCTION MANUAL BEFORE OPERATING THE MACHINE. Learning the machine’s application, limitations, and specifi
5Failure to follow these rules may result in serious personal injury.ADDITIONAL SPECIFIC SAFETY RULESSAVE THESE INSTRUCTIONS. Refer to them often and
6Fig. A Fig. BGROUNDED OUTLET BOXCURRENT CARRYING PRONGSGROUNDING BLADE IS LONGEST OF THE 3 BLADESGROUNDED OUTLET BOXGROUNDING MEANSADAPTERPOWER CONNE
7EXTENSION CORDSUse proper extension cords. Make sure your extension cord is in good condition and is a 3-wire extension cord which has a 3-prong
81. Scroll Saw2. Stand Leg (3)3. Lower Side Brace 30" Long (2)4. Upper Side Brace 22½" Long (2)5. Lower Back Brace 18½" Long (1)6.
9STANDNOTE: THE ASSEMBLY OF THIS STAND WILL USE M8X16MM CARRIAGE HEAD SCREWS AND M8 FLANGED HEX NUTS. KEEP THE HEAD OF THE CARRIAGE HEAD SCREWS
Comments to this Manuals