Delta Three Phase 1342457 06-03-05 Instruction Manual download pdf (Page 11)

Fig. 13

Fig. 15

RAISING AND LOWERING THE

TABLE

Adjust the table height by loosening lock knob (A) Fig.

15, and rotating table adjusting handwheel (B). To

raise the table, turn handwheel (B) clockwise; to lower

the table, turn handwheel (B) counterclockwise.

Tighten lock knob (A) Fig. 15, after table height adjust-

ment is made. The English/Metric table height scale

TANT: For best results, setting of the table should

always be made from the bottom to the up position.

Fig. 14

OPERATION

OPERATIONAL CONTROLS AND ADJUSTMENTS

STARTING AND STOPPING THE PLANER

1. The power switch (A) Fig. 13 is located on the front

of the planer. To turn the machine on, push the

“START” button.

2. To turn the machine “OFF”, push the stop button

(B).

LOCKING SWITCH IN “OFF” POSITION

IMPORTANT: When the machine is not in use, the

switch should be locked

in the “OFF” position to prevent

unauthorized use,

using a padlock (C) Fig. 14 with a

3/16" diameter shackle.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

No comments

Delta Three Phase 1342457 06-03-05 Instruction Manual Page 11