Delta PG-40 Specifications Page 61

  • Download
  • Add to my manuals
  • Print
  • Page
    / 179
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 60
VFD-B Series
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
5-26
Max. Output Freq.
60Hz
Pr.01-00
0Hz
0V
4m
A
10V
20m
A
Factory Settings
Pr.01-00=60Hz--Max. output Freq.
Pr.04-11=100%--bias adjustment
Pr.04-12=1 -- bias polarity
Pr.04-13=100% -- pot. freq. gain
Pr.04-14=1 -- REV. motion enable in negative bias
anti-slope
04 - 04
Multi-function Input Terminal (MI1)
Factory Setting: 01
04 - 05
Multi-function Input Terminal (MI2)
Factory Setting: 02
04 - 06
Multi-function Input Terminal (MI3)
Factory Setting: 03
04 - 07
Multi-function Input Terminal (MI4)
Factory Setting: 04
04 - 08
Multi-function Input Terminal (MI5)
Factory Setting: 05
04 - 09
Multi-function Input Terminal (MI6)
Factory Setting: 06
Settings 00 to 36
Settings
Parameters & Functions Table:
Value Functions
Descriptions
00 No Function
The purpose of this setting is to provide isolation for
unused Multi-Function Input Terminals. Any unused
terminals should be programmed to 0 to insure they
have no effect on drive operation.
01 Multi-Step Speed Command 1
02 Multi-Step Speed Command 2
03 Multi-Step Speed Command 3
04 Multi-Step Speed Command 4
Parameter values 1, 2, 3, 4 program any four of the
following Multi-Function Input Terminals for multi-step
speed command function. These four inputs select
the multi-step speeds defined by Pr.05-00 to Pr.05-14
as shown in the following diagram.
Note: Pr.05-00 to Pr.05-14 can also control output
speed by programming the AC drives internal PLC
function. There are 17 step speed frequencies
(including Master Frequency and Jog Frequency) to
select for application.
05 External Reset (NO)**
Parameter value 5 programs a Multi-Function Input
Terminal to be an External Reset.
Note: the External Reset has the same function as
the Reset key on the Digital keypad. After fault such
as O.H., O.C. and O.V. are clear, this input can be
used to reset the drive.
Page view 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 178 179

Comments to this Manuals

No comments