Delta 36-5000 Instruction Manual download pdf (Page 3)

100

GENERAL POWER TOOL SAFETY RULES

continued on page 4

Failure to follow these rules may

result in serious personal injury.

1. READ INSTRUCTION MANUAL AND KNOW YOUR

TOOL. Read and familiarize yourself with entire

instruction manual. Learning the tool’s proper

applications, limitations, and specific potential

hazards will greatly minimize the possibility of

accidents and injury. Make sure all users are familiar

with its warnings and instructions before using tool.

2. KEEP GUARDS AND SAFETY DEVICES IN PLACE

and working properly.

3. REMOVE ADJUSTING KEYS AND WRENCHES.

Form habit of checking to see that all adjusting keys

and wrenches are removed before starting tool.

4. KEEP WORK AREA CLEAN AND WELL LIT.

Cluttered or poorly-lit work areas, surfaces and

benches can lead to accidents.

5. DO NOT USE OR STORE TOOL IN DANGEROUS

ENVIRONMENTS. Exposure to rain and damp or

wet locations can result in shock or electrocution,

or damage the tool. Do not operate electric tools

near flammable liquids or in gaseous or explosive

atmospheres. Motors and switches in these tools

may spark and ignite fumes.

6. KEEP CHILDREN AND BYSTANDERS AWAY from

work area.

7. LOCK TOOLS AND WORK AREA. Use padlocks,

and master switches, or remove and store starter

keys to prevent operation by children and other

unauthorized users.

8. DO NOT FORCE TOOL OR WORKPIECE. Operate

tool at intended speed and feed rate for better and

safer operation.

9. USE PROPER TOOL. Do not force tool to do a task

for which it was not designed.

10. DO NOT ABUSE POWER CORDS. NEVER yank

cord to disconnect from receptacle, crush cord, or

expose it to heat, oil or sharp objects.

11. USE PROPER EXTENSION CORD. If you use an

extension cord, make sure it is in good condition

and heavy enough to carry the current your product

will draw. An undersized cord will cause a drop

in line voltage, resulting in loss of power and

overheating. See Extension Cord Chart for correct

size depending on cord length and data plate

ampere rating. If in doubt, use the next smaller

gauge number. The smaller the gauge number, the

heavier the cord. When working outside, make sure

extension cord is rated for outdoor use. Consult

power connection section of this manual for

Extension Cord Chart and power connection safety.

12. SECURE WORKPIECE. Use clamps or a vise to

hold the workpiece when practical. It is safer than

using your hands and frees both hands to operate

tool.

13. DO NOT OVERREACH. Keep proper footing and

balance to maintain control.

14. MAINTAIN TOOLS WITH CARE. Keep tools

sharp and clean for best and safest performance.

Follow instructions for lubricating and changing

accessories.

15. DISCONNECT TOOL from power source before

servicing, adjusting or changing set-ups or blades,

bits, cutters and other accessories.

16. TO REDUCE RISK OF ACCIDENTAL STARTING,

make sure power switches are in “OFF” position

before plugging tool in.

17. Do not touch the plug’s metal prongs when

unplugging or plugging in the cord.

CAREFULLY READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS ON YOUR PRODUCT

AND IN THIS MANUAL. SAVE THIS MANUAL. MAKE SURE ALL USERS ARE FAMILIAR WITH ITS

WARNING AND INSTRUCTIONS WHEN USING THE TOOL. Improper operation, maintenance or modification of

tools or equipment could result in serious injury and/or property damage.

If you have any questions or concerns relative to the use of your tool or the contents of this manual, stop using the

tool and contact DELTA

Power Equipment Corporation Customer Care at 1-800-223-7278.

SAFETY LOGOS

The definitions below describe the level of severity for each signal word. Please read the manual and pay attention

to these symbols.

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious

injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious

injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate

injury.

IMPORTANT SAFETY INSTRUCTIONS

1 2 3 4 5 6 7 8 ... 99 100

Comments to this Manuals

No comments

Delta 36-5000 Instruction Manual Page 3

Comments to this Manuals

Related products and manuals for Circular saws Delta 36-5000