Delta 20-330 Instruction Manual Page 12
- Page / 24
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
12
ADJUSTING BLADE TRACKING
1. Place the saw arm in the vertical position and open
the wheel cover (A) Fig. 17.
2. Turn on the band saw. The blade is tracking properly
when the back of the blade (B) Fig. 17, is just touching
the edge of the wheel flange (C). The back of the blade
should not be rubbing against the flange.
3. If an adjustment is necessary the blade guide
bearings and blade support bearings (E) Fig. 19 (two of
which are shown) should be clear of the blade.
4. Loosen screw (D) Fig. 18.
5. With the band saw running, turn adjusting screw (E)
until the blade is tracking properly making certain blade
tension is maintained by turning blade tension knob. (F).
The blade is tracking properly when the back side of the
saw blade just touches the flange on the wheel.
6. Tighten screw (D) Fig. 18, when adjustment is
complete.
7. IMPORTANT: IT IS POSSIBLE WHEN MAKING
THIS ADJUSTMENT TO OVER TIGHTEN THE
ADJUSTING SCREW (E), FIG. 18, AND CAUSE THE
BLADE TO BE MIS-ALIGNED. If this happens, loosen
the adjusting screw (E) several turns but do not remove
it from its threaded hole and loosen screw (D). Turn
screw (D) clock-wise until it stops but do not tighten.
Then turn the adjusting screw (E) clockwise until it
bottoms. Turn on the machine and turn adjusting screw
(E) clockwise a small amount at a time until the blade is
tracking correctly and tighten screw (D) Fig. 18.
8. After the blade is tracking properly make sure to ad-
just the blade guide bearings and blade support
bearings.
Fig. 17
Fig. 18
ADJUSTING BLADE SUPPORT
BEARINGS
DISCONNECT MACHINE FROM
POWER SOURCE.
1. The blade support bearing (A) Fig. 19, should be ad-
justed so it just touches the back of the saw blade after
the blade is tracking properly. To adjust, loosen screw
(C) and move the bracket (D) up or down until the
support bearing (A) just touches the back of the blade
(B). Then tighten screw (C).
2. Adjust the other blade support bearing in the same
manner.
Fig. 19
D
E
F
B
C
A
D
C
A
B
E
- 5" x 6" 1
- Horizontal Band Saw 1
- TABLE OF CONTENTS 2
- IMPORTANT SAFETY INSTRUCTIONS 2
- CALIFORNIA PROPOSITION 65 3
- GENERAL SAFETY RULES 4
- POWER CONNECTIONS 6
- MOTOR SPECIFICATIONS 6
- GROUNDING INSTRUCTIONS 6
- FUNCTIONAL DESCRIPTION 7
- ASSEMBLY 8
- CARTON CONTENTS 8
- ASSEMBLING STAND 9
- ASSEMBLING WHEELS 9
- ASSEMBLING VISE HANDWHEEL 9
- ASSEMBLING STAND HANDLE 10
- ASSEMBLING STOCK ADVANCE STOP 10
- ASSEMBLING GUARD AND BELT 10
- FASTENING BAND SAW TO 10
- SUPPORTING SURFACE 10
- OPERATION 11
- ADJUSTING BLADE SUPPORT 12
- BEARINGS 12
- ADJUSTING BLADE TRACKING 12
- ADJUSTING BLADE GUIDE 13
- ADJUSTING BLADE 90 DEGREES TO 13
- THE TABLE SURFACE 13
- BRACKETS 14
- ADJUSTING FEED RATE 14
- OPERATING AND 14
- ADJUSTING THE VISE 14
- ADJUSTING STOCK STOP 15
- ARM POSITIONING LEVER 15
- CHANGING SPEEDS AND 15
- ADJUSTING BELT TENSION 15
- BLADE SELECTION 16
- SPEED AND MATERIAL CHART 16
- CHANGING BAND SAW FROM 17
- HORIZONTAL TO VERTICAL 17
- POSITION 17
- MACHINE USE 18
- TROUBLESHOOTING 19
- BAND SAW BLADES 21
- MAINTENANCE 22
- ACCESSORIES 23
- WARRANTY 23
- • DELTA SERVICE CENTERS 24
- • DELTA) 24
Related products and manuals for Power tools Delta 20-330
Power tools Delta 37-070 Instruction Manual
(21 pages)
(21 pages)
Power tools Delta 37-285 Owner's Manual
(23 pages)
(23 pages)
(76 pages)
Power tools Delta 36-070 Instruction Manual
(21 pages)
(21 pages)
Power tools Delta 28-293 Instruction Manual
(16 pages)
(16 pages)
Power tools Delta 36-650 Instruction Manual
(32 pages)
(32 pages)
Power tools Delta 28-299A Instruction Manual
(16 pages)
(16 pages)
Power tools Delta 43-459 Instruction Manual
(16 pages)
(16 pages)
Power tools Delta 11-990 Instruction Manual
(15 pages)
(15 pages)
Power tools Delta 900585 Instruction Manual
(16 pages)
(16 pages)
Power tools Delta 17-965 Instruction Manual
(17 pages)
(17 pages)
Power tools Delta TS300 Instruction Manual
(27 pages)
(27 pages)
Power tools Delta 36-220 Instruction Manual
(23 pages)
(23 pages)
Power tools Delta 32-326 Instruction Manual
(28 pages)
(28 pages)
Power tools Delta 28-190 Instruction Manual
(18 pages)
(18 pages)
Power tools Delta 36-600 Instruction Manual
(29 pages)
(29 pages)
Power tools Delta 441 Instruction Manual
(32 pages)
(32 pages)
Power tools Delta 22-540 Instruction Manual
(17 pages)
(17 pages)
Power tools Delta 36-550 Instruction Manual
(24 pages)
(24 pages)
Power tools Delta 17-900 Instruction Manual
(16 pages)
(16 pages)
© 2020, manymanuals.com. All rights reserved. | 1.338 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals