Delta 37-070 Instruction Manual download pdf (Page 9)

Fig. 9

Fig. 10

Fig. 11

Fig. 12

6. Tighten two screws (G) Fig. 12.

5. Position fence (L) Fig. 11, so that rounded section

(M) on bottom of fence is over cutterhead opening as

shown.

4. Slide groove of fence (L) Fig. 10, over T-nuts (J) as

shown.

3. Assemble 5/8" long socket button head screw (G)

Fig. 9, to fence tilting bracket (H) and thread T-nut (J)

onto threaded end of screw (G) as shown. DO NOT

COMPLETELY TIGHTEN SCREW (G) AT THIS TIME.

Assemble screw and T-nut to opposite end of tilting

bracket in the same manner.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 20 21

No comments

Delta 37-070 Instruction Manual Page 9