Delta SHOPMASTER SS250 Instruction Manual download pdf (Page 16)

4. Push lower blade chuck locking lever (F) Fig. 25, to

the rear as shown. This will release the blade (G) from

the lower chuck (H).

Fig. 25

Fig. 26

5. Insert new blade (I) Fig. 26, into the upper blade

holder (J) making certain the blade teeth are pointing

down toward the table. Push upper blade chuck locking

lever (L) to the front. Insert new blade into the lower

blade holder Fig. 25 in the same manner.

6. Apply blade tension by referring to the following

section “ADJUSTING BLADE TENSION.”

FUSE REPLACEMENT

A fuse holder (A) Fig. 27, and fuse (B) are located at the

rear of the machine and should be removed and

checked if the machine does not operate. If the fuse (B)

is bad, replace it with a 3 amp fast blow fuse.

Fig. 27

1 2 ... 11 12 13 14 15 16 17 18 19

No comments

Delta SHOPMASTER SS250 Instruction Manual Page 16