Delta SHOPMASTER SS250 Instruction Manual download pdf (Page 17)

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network

of Porter-Cable • Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional

information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location

of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers,

and Delta Authorized Service Stations. Please visit our Web Site

www.deltamachinery.com for a catalog or

for the name of your nearest supplier.

Since accessories other than those offered by Delta have not been tested with this

product, use of such accessories could be hazardous. For

safest operation, only Delta

recommended accessories should be used with this product.

ACCESSORIES

LUBRICATION

Perform maintenance below after each 20 hours of use.

DISCONNECT MACHINE FROM POWER

SOURCE.

1. Tilt the table 45° to the left as shown in Fig. 28.

2. Remove four rubber grommets (A) Fig. 29 that cover

the lubrication access holes.

3. Lubricate the pivot points in each of the four access

holes with a few drops of light machine oil.

4. Reassemble the four grommets as shown in Fig. 29.

5. Apply lightweight grease or anti-seize to lubricate

the tensioning lever (C) Fig. 21 where it pivots on the

upper chuck.

Fig. 28

Fig. 29

1 2 ... 12 13 14 15 16 17 18 19

No comments

Delta SHOPMASTER SS250 Instruction Manual Page 17