Delta 32-326 Instruction Manual download pdf (Page 17)

CONNECTING AIR TO

MACHINE

(For 32-326 Pneumatic Line Boring Machine

Only)

A 1/4" female pipe thread (A) Fig. 43, is provided on the

air filter for connecting the air line to the machine. An air

supply of 90 psi is recommended for best results and this

air supply must not exceed 125 psi.

ADJUSTING AIR

PRESSURE

(For 32-326 Pneumatic Line Boring Machine

Only)

An air pressure gage (A) Fig. 44, and regulator (B) are

supplied to regulate the air pressure used to operate the

machine. To adjust the air pressure, pull out and turn

regulator (B) until the correct air pressure is indicated on

the gage (A), push regulator (B) back into the locked

position. For best results set pressure at 90 psi.

Fig. 43

Fig. 44

OPERATING CONTROLS AND ADJUSTMENTS

Fig. 45

STARTING AND

STOPPING MACHINE

(For 32-325 Line Boring Machine Only)

The switch (A) Fig. 45, is located on the top of the motor.

To turn the machine “ON”, move the switch (A) to the ON

position and to turn the machine “OFF”, move the switch

(A) to the OFF position.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

No comments

Delta 32-326 Instruction Manual Page 17