Delta 36-960 Instruction Manual download pdf (Page 4)

UNPACKING AND CLEANING

Carefully unp ack the saw and fence system from the shipping containers.

Clean all loose p art s and remove the protective coating from the

machined surfaces of the saw table. This coating may be removed with a

sof t cloth moistened with WD-40

ﬁ

(do not use acetone, gasoline, or

lacquer thinner for this purpose). Figures 1, 2, 3, 4, and 5, illustrate the

saw and all loose items supplied with the machine.

Fig. 1

Diameter of Arbor

/8″ (16 mm)

Diameter of Blade 10 ″ (254 mm)

Blade Speed (with 3450 rpm motor) 4000 rpm

C a p acities:

Maximum depth of cut 3

/8″ (79 mm)

Maximum rip to right of blade

W ith Biesemeyer Commercial

Saw Fence System 50″ (1270 mm)

Maximum rip to lef t of blade

W ith Biesemeyer Fence 12″ (305 mm)

Maximum thickness of cut at 45” 2

/8″ (54 mm)

Dist ance; front of t able to center of blade 16

/16″ (427 mm)

Table in front of saw blade

At maximum depth of cut 12

/4″ (311 mm)

Maximum width of dado

/16″ (21 mm)

Table:

Height 34 ″ (864 mm)

Size with Extension Wing

And Biesemeyer Table Board 74″ x 27 ″ (1880x686

mm)

T-Slot Miter Gage Groove

/8″ x

/4″ (10x19 mm)

Overall Dimensions:

Height 36

/4″ (933 mm)

Wid th with W ings and Guide Bar 45

/8″ (1152 mm)

Wid th with W ing

And Biesemeyer 50″ Guide Bar 84″ (2134 mm)

Depth 35

/4″ (908 mm)

Depth with Biesemeyer Rip Fence 42″ (1067 mm)

MACHINE DATA

1. Unisaw

2. Switch

3. Motor cover

4. Blade guard and splitter bracket

5. Support rod

8″ Internal tooth washer

7. 5/8-18 Jamb nut

8. Upper bracket for splitter

9. Lower bracket for support rod

10.

16″ l.D. Flat washers (2)

11.

16″ l.D. Lockwashers (3)

Fig. 2

12.

16-18 x 1 ″ Hex head cap screws (4)

13. Arbor wrenches (2)

14.

4″ and

8″ Hex wrenches

15. Miter gage

16. Flat washer for miter gage

17. Handle for miter gage handle

18. Cap for miter gage handle

19. S torage hook for arbor wrenches

20. #10 x

2″ hex washer head screws (10)

21. Hanger for miter gage

22. Hangers for rip fence (2)

23. Flat head screw for mounting switch

24. Flat washer for mounting switch

25. Hex nut for mounting switch

26. Gasket for motor cover

27. Cable tie

28. Latch for motor cover

29. Square cornered cast iron extension wing (right)

30. Square cornered cast iron extension wing (lef t)

31. Mounting hardware

1 2 3 4 5 6 7 8 9 ... 26 27

Comments to this Manuals

No comments

Delta 36-960 Instruction Manual Page 4

Comments to this Manuals

Related products and manuals for Circular saws Delta 36-960