Delta Digital timer User Manual Page 70

  • Download
  • Add to my manuals
  • Print
  • Page
    / 74
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 69
68
Cat. No.
Parameters
PID Temperature Controller Series PR 69
151D12B
151A12B
151B12B 151C12B
• Universal Input
• Configurable output combination
• Field configurable: band, deviation,
sensor break & loop break alarms
• Single/Dual acting PID controllers with 5 control modes
Auto-tuning PID with provision for soft- start
• 6 segment ramp & soak profile with power failure
resumption modes
O
0 to + 50 C
O
C
Operating Temperature
Temperature sensors / inputs
Measurement Range
Measurement Accuracy
Resolution
Display
Keypad
-20%/+10%
SSR output
NA NA
2
Configurable Set Points
EMI/EMC
Radio interference suppressions
ESD
Fast transients
Surges
Certification
Linear DC Output
NA
0 - 10V or 4 - 20mA
(user selectable)
Linear DC Output Update rate
NA
150 ms - 5 s Programmable
NA
Linear DC Output type
Contact rating
Pollution Degree
Statutory Requirements:
2
Degree of Protection
Dimensions (W x H x D) (in mm) 48 x 48 x 91.5
110-230 VAC, 50-60 Hz
J, K, E, S, B, R thermocouple, RTD( PT100-3 wire compensation),
mV signals (0-50 mV, 0-60 mV,12-60 mV)
Sensor J: 0 to 700°C/32 to 1292°F, Sensor K: 0 to 1300°C/32 to 2372°F,
Sensor E: 0 to 600°C/32 to 1112°F, Sensor R: 0 to 1750°C/32 to 3182°F, Sensor S: 0 to 1750°C/32 to 3182°F,
Sensor B: 250 to 1820°C/482 to 3308°F, Sensor Pt100 3 wire: - 200 to 700°C/-328 to 1292°F
+/-0.5% of full scale of PT100, +/-1% of full scale for TC
0.1°C for RTD, J,K,E & 1° for S,B & 0.001°C for mV signals
Dual 7 segment with LED indications, 4-digit process value, 4 digit set value
4-Keys: 1 - Enter, 2-Up, 3 - Down, 4 - Exit / on field set point selection
12 VDC, 24mA, short circuit protection
Retransmission -
PV, Control - Output Power.
One SPST relay 8A,
240VAC OR 5A, 28VDC
Two SPST relay 5A 240VAC or 28VDC
IP65 (For Front Panel only)
MOUNTING DIMENSION (mm)
45.0
45.0
GRID RING
85.0
91.5
53.0 C/C
42.0 C/C
48.0
56.5
TERMINAL TORQUE & CAPACITY
Torque 0.5 N.m (5 Lb. in)
Terminal Screw - M3
2
1 x 0.12 - 2 mm Solid Wire /
single wire ferrule
2 x 0.2 - 1 mm Insulated with
twin ferrule
2
3.5 mm
AWG 1 x 24 to 12
One SPST relay 5A,
240 VAC/ 28 VDC,
One analog output
(0-10 V, 4-20 mA) &
a SSR driving output
(12 VDC, 24 mA)
2 relays (SPST 5A each,
240V AC / 28V DC)
and One analog output
(0-10 V, 4-20 mA)
Weight (unpacked)
185g
• Rapid set point change feature
• RS 485 communication
• Bumpless auto-manual transfer
• IP 65 protection
Supply Voltage ( )
Supply Variation
(of )
CISPR 14-1
IEC 61000-4-2
IEC 61000-4-4
IEC 61000-4-5
Ed. 5.0 (2005-11) Class A
Ed. 1.2 (2001-04) Level II
Ed. 2.0 (2004-07) Level IV
Ed. 2.0 (2005-11) Level IV
RoHS
Compliant
Page view 69
1 2 ... 65 66 67 68 69 70 71 72 73 74

Comments to this Manuals

No comments