Delta 36-235 Specifications download pdf (Page 5)

UNPACKING A N D CLEANING

Fig. 2

Your new compound miter saw is shipped complete in

one carton. Carefully unp ack the machine and all loose

items from the carton. IMPORTANT:D O NOT LIFT T H E

MITER S AW B Y THE SWITCH HANDLE O R TABLE

CONTROL HANDLE AS THIS M AY CAUSE MIS-

ALIGNMENT. A LW A Y S LIFT T H E MACHINE B Y THE

BASE. Remove the protective coating from all unp ainted

parts. This coating may be removed with a sof t cloth

moistened with kerosene (do not use acetone, gasoline,

or lacquer thinner for this purpose). Figure 2 illustrates

the saw removed from the carton. Note that the machine

is shipped with the cuttinghead locked in the down

position and the t able rot ated to the 45 degree lef t miter

position. Figure 3 illustrates the loose items supplied with

your machine.

1 - Extension t able

2 -Fence slide

3 -Fence slide support

4 -Dust bag

5 -W ork clamp

6 -Arbor and fence wrench

7 -1/8 hex wrench

8 -5/32 hex wrench

9 -Open end wrench

10 -Lock knobs for work clamp (2)

11 -Lock handle for slide fence

12 -1/4 flat washer

Fig. 3

13 -5/16 flat washer (2)

14 -5/16 lock washer (2)

15 -5/16-18 x 1/2 long hex head screw (2)

16 -5/16 flat washer (2)

17 -5/16 lock washer (2)

18 -5/16-18 x 1-1/4 long hex head screws (2)

1 2 3 4 5 6 7 8 9 10 ... 27 28

No comments

Delta 36-235 Specifications Page 5