Delta SA180 Operations Instructions download pdf (Page 19)

TROUBLESHOOTING

For assistance with your machine, visit our website at www.deltamachinery.com for a list of service centers or call the

DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).

MAINTENANCE

REPLACEMENT PARTS

Use only identical replacement parts. For a parts list or to

order parts, visit our website at

servicenet.deltamachinery.

com.

You can also order parts from your nearest factory-

owned branch, or by calling our Customer Care Center at

1-800-223-7278 to receive personalized support from highly-

trained technicians.

SERVICE AND REPAIRS

All quality tools will eventually require servicing and/or

replacement of parts. For information about Delta Machinery,

its factory-owned branches, or an Authorized Warranty

KEEP MACHINE CLEAN

Periodically blow out all air passages with dry compressed

air. All plastic parts should be cleaned with a soft damp

cloth. NEVER use solvents to clean plastic parts. They

could possibly dissolve or otherwise damage the material.

Wear certified safety equipment for

eye, hearing and respiratory protection while using

compressed air.

FAILURE TO START

Should your machine fail to start, check to make sure

the prongs on the cord plug are making good contact

in the outlet. Also, check for blown fuses or open circuit

breakers in the line.

LUBRICATION & RUST PROTECTION

Apply household floor paste wax to the machine table,

extension table or other work surface weekly. Or use a

commercially available protective product designed for

this purpose. Follow the manufacturer’s instructions for

use and safety.

To clean cast iron tables of rust, you will need the

following materials: a sheet of medium Scotch-Brite™

Blending Hand Pad, a can of WD-40

and a can of

degreaser. Apply the WD-40 and polish the table surface

with the Scotch-Brite pad. Degrease the table, then apply

the protective product as described above.

SERVICE

Service Center, visit our website at www.deltamachinery.

com or call our Customer Care Center at 1-800-223-7278.

All repairs made by our service centers are fully guaranteed

against defective material and workmanship. We cannot

guarantee repairs made or attempted by others.

You can also write to us for information at Delta Machinery,

4825 Highway 45 North, Jackson, Tennessee 38305 -

Attention: Product Service. Be sure to include all of the

information shown on the nameplate of your tool (model

number, type, serial number, etc.)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 59 60

Comments to this Manuals

No comments

Delta SA180 Operations Instructions Page 19

Comments to this Manuals

Related products and manuals for Power sanders Delta SA180