Delta 43-290C Instruction Manual download pdf (Page 7)

Assembling and Attaching Fence

Figure 7

The fence for this shaper can be mounted in two positions.

Forward, using the two front fence mount holes (A), or in

the back using the two rear fence mount holes (B).

Note: The two table inserts (C) have been removed to show

the three insert leveling screws (D).

Figure 8

Attach the right and left fence bracket assemblies (A) to

the center guard (B). Use supplied hex screws and lock

washers (C) for fence adjuster and allen screws, lock

washers, and flat washers (D) for fence bracket lockdown.

Figure 9

Place the guard/bracket assembly on the shaper table.

Fasten assembly to the front or rear fence mounting holes

using provided allen screws and lock washers (A).

Figure 10

Loosen indexable locking levers ( B in Fig. 9 ) and slide

extruded aluminum fence halves (C) over locking dogs

(D). Select a fence position and tighten the locking levers.

Fig. 7

Fig. 8

Fig. 9

Fig. 10

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Delta 43-290C Instruction Manual Page 7