Delta DP200 Instruction Manual download pdf (Page 7)

ASSEMBLY

WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE MACHINE TO THE POWER SOURCE UNTIL THE

MACHINE IS COMPLETELY ASSEMBLED AND YOU READ AND UNDERSTAND THE ENTIRE INSTRUCTION

MANUAL.

1. Assemble the column (A) Fig. 3, to the base (B) using

the four screws, three of which are shown at (C). Loosen

set screw (D) and remove ring (E) and raising rack (F).

Fig. 3

Fig. 4

Fig. 5

Fig. 6

2. Make certain worm gear (G) Figs. 4 and 5, is in place

in table bracket (H) as shown.

3. Insert raising rack (F) Fig. 6, which was removed in

STEP 1, into groove in table bracket making sure teeth

of worm gear (G) located inside table bracket are

engaged with teeth of raising rack (F).

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Delta DP200 Instruction Manual Page 7