Delta 36-412 Service Manual download pdf (Page 19)

--- 15 ---

8-4. Confirmation for Use of Sub Fence

(1) Confirmation for use of sub fence (A)

WARNING: In the case of right bevel cutting, turn sub fence (A) clockwise. Unless it is turned

clockwise, the main body or saw blade may contact sub fence (A), resulting in an injury.

This power tool is equipped with sub fence (A).

In the case of direct angle cutting and left bevel angle

cutting, use sub fence (A). Then you can realize

stable cutting of the material with a wide back face.

In the case of right bevel cutting, raise sub fence (A)

up as illustrated in Fig. 19 and then turn it clockwise.

Fig. 19

Fig. 21

Fig. 20

Sub fence (A)

Turn

Fence (A)

Left bevel angle cutting

Direct angle cutting

Left bevel angle

cutting

Right bevel

angle cutting

(2) Confirmation for use of sub fence (B)

WARNING: In the case of left bevel cutting, turn sub fence (B) counterclockwise. Unless it is turned

counterclockwise, the main body or saw blade may contact sub fence (B), resulting in an

injury.

This power tool is equipped with sub fence (B). In the

case of direct angle cutting and right bevel angle

cutting, use sub fence (B). Then you can realize stable

cutting of the material with a wide back face.

In the case of left bevel cutting, raise sub fence (B) up

as illustrated in Fig. 20 and turn it counterclockwise.

Turn

Sub fence (B)

Fence (B)

Right bevel angle cutting

Direct angle cutting

(3) Confirmation for use of sub fence (C)

WARNING: In the case of left bevel angle cutting, remove sub fence (C). If sub fence (C) is not

removed, sub fence (C) will contact the main unit or the saw blade and result in injury.

This power tool is equipped with sub fence (C). In the

case of direct angle cutting and right bevel angle

cutting, use sub fence (C). (Fig. 21)

Then you can realize stable cutting of the material with

a wide back face.

Fence (B)

Sub fence (C)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 75 76

Comments to this Manuals

No comments

Delta 36-412 Service Manual Page 19

Comments to this Manuals

Related products and manuals for Circular saws Delta 36-412