Delta 36-412 Service Manual download pdf (Page 39)

--- 35 ---

11-3. Reassembly

Reassembly can be accomplished by following the disassembly procedures in reverse. However, special

attention should be given to the following items.

(1) Prior to reassembly, measure the insulation resistance of the armature, stator, switch and other electrical

components and confirm that the insulation resistance of each part is more than 5 M Ω.

(2) When replacing Spring (A) [42], apply 5 grams of Hitachi Motor Grease to the inner circumference of new

Spring (A) [42] prior to reassembly.

(3) When replacing Liner (A) [157], apply Hitachi Motor Grease to the sliding surface of the Base Ass'y [167] prior

to reassembly.

(4) When replacing the Return Spring [298], apply 2 grams of Hitachi Motor Grease to the inner circumference of

the new Return Spring [298] prior to reassembly.

(5) When replacing Liner (B) [65], apply 5 grams of Hitachi Motor Grease to the sliding surface of the Turn Table

Ass'y [108] prior to reassembly.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 75 76

No comments

Delta 36-412 Service Manual Page 39