Delta ShopMaster A05581 Instruction Manual download pdf (Page 25)

Fig. 57

Fig. 58

2. Attach the dado head set (D) Fig. 57, to the saw arbor.

NOTE: THE OUTSIDE ARBOR FLANGE CAN NOT BE

USED WITH THE DADO HEAD SET, TIGHTEN

THE

ARBOR NUT AGAINST THE DADO HEAD SET BODY.

DO NOT LOSE THE OUTSIDE ARBOR FLANGE. IT

WILL BE NEEDED WHEN REATTACHING A BLADE TO

THE ARBOR.

THE ACCESSORY DADO HEAD SET

TABLE INSERT (E) FIG. 57, MUST BE USED IN PLACE

OF THE STANDARD TABLE INSERT.

THE BLADE GUARD AND SPLITTER

ASSEMBLY CANNOT BE USED WHEN DADOING AND

MUST BE REMOVED OR SWUNG TO THE REAR OF

THE SAW. AUXILIARY JIGS, FIXTURES, PUSH

STICKS AND FEATHER BOARDS CAN AND SHOULD

BE USED.

3. Fig. 58, shows a typical dado operation using the miter

gage as a guide.

NEVER USE THE DADO HEAD IN A

BEVEL POSITION.

ALWAYS INSTALL BLADE GUARD

AFTER OPERATION IS COMPLETED.

1 2 ... 20 21 22 23 24 25 26 27 28 29

No comments

Delta ShopMaster A05581 Instruction Manual Page 25