Delta 1.07 VFD-D D User Manual download pdf (Page 119)

Chapter 5 Troubleshooting |DD Series

5-14

5-13 Electromagnetic/Induction Noise

There are many noises surround the AC motor drives and invade it by radiation or power circuit. It may

cause the misoperation of control circuit and even damage the AC motor drive. Of course, that is a

solution to increase the noise tolerance of AC motor drive. But it is not the best one due to the limit.

Therefore, solve it from the outside as following will be the best.

1. Add surge killer on the relay or contact to suppress switching surge between ON/OFF.

2. Shorten the wiring length of the control circuit or serial circuit and separate from the main circuit

wiring.

3. Comply with the wiring regulation for those shielded wire and use isolation amplifier for long

wire.

4. The grounding terminal should comply with the local regulation and ground independently, i.e.

not to have common ground with electric welding machine and power equipment.

5. Connect a noise filter at the input terminal of the AC motor drive to prevent noise from power

circuit.

In a word, three-level solutions for electromagnetic noise are “no product”, “no spread” and “no

receive”.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 140 141

No comments

Delta 1.07 VFD-D D User Manual Page 119