Delta Sidekick 36-210 Instruction Manual download pdf (Page 5)

UNPACKING

Fig. 2

1. Remove the miter box and all loose items from the

carton. IMPORTANT: DO NOT LIFT THE MITER BOX BY

THE SWITCH HANDLE OR TABLE CONTROL HANDLE

AS THIS MAY CAUSE MISALIGNMENT. ALWAYS LIFT

THE MACHINE BY THE BASE.

2. Fig. 2, illustrates the miter box after it has been re-

moved from the carton. Note that the machine is shipped

with the cuttinghead (A) locked in the down position and

the table control arm (B) rotated to the 45 degree right

miter position.

Fig. 4

ASSEMBLY INSTRUCTIONS

WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE MITER BOX TO THE

POWER SOURCE UNTIL THE MACHINE IS COMPLETELY ASSEMBLED AND YOU HAVE

READ AND UNDERSTOOD THE ENTIRE OWNERS MANUAL.

Fig. 3

MOVING CUTTINGHEAD

TO THE UP POSITION

1. Pull out cuttinghead lockpin (A) Fig. 3, and move

the cuttinghead (B) to the up position.

2. Fig. 4, illustrates the lockpin (A) pulled out and the

cuttinghead (B) in the up position.

1 2 3 4 5 6 7 8 9 10 ... 19 20

No comments

Delta Sidekick 36-210 Instruction Manual Page 5