Delta Sidekick 36-210 Instruction Manual download pdf (Page 7)

Fig. 9

Fig. 10

EXTENSION CORDS

Use proper extension cords. Make sure your extension

cord is in good condition and is a 3-wire extension cord

which has a 3-prong grounding type plug and a 3-pole

receptacle which will accept the tool’s plug. When using

an extension cord, be sure to use one heavy enough to

carry the current of the saw. An undersized cord will

cause a drop in line voltage, resulting in loss of power

and overheating. Fig. 10, shows the correct gage to use

depending on the cord length. If in doubt, use the next

heavier gage. The smaller the gage number, the heavier

the cord.

FASTENING MACHINE TO SUPPORTING SURFACE

Before operating your compound miter box, make sure it

is firmly mounted to a workbench or other supporting

surface. Four holes are provided, two of which are shown

at (A) Fig. 9, for fastening the saw to a supporting sur-

face.

When frequently moving the saw from place to place,

we suggest that the saw be mounted to a 3/4" piece of

plywood. The saw can then be easily moved from place

to place and the plywood clamped to the supporting

surface using“C” clamps.

TOTAL LENGTH OF

CORD IN FEET

0-25

26 - 50

Over 50

GAGE OF EXTENSION

CORD TO USE

14 AWG

12 AWG

Not Recommended

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

Delta Sidekick 36-210 Instruction Manual Page 7