Delta DP250 Instruction Manual download pdf (Page 15)

LUBRICATION

1. DISCONNECT MACHINE FROM POWER SOURCE.

2. Remove the six screws (A) Fig. 30 that hold the top

cover in place, and remove the top cover.

3. The variable speed pulleys should be oiled weekly

with a few drops of light machine oil in the two oil holes

(B) Fig. 31, located on top of the variable speed pulleys.

IMPORTANT: Oil the holes when the drill press is

turned OFF. Then turn the machine ON and run

through the low and high speed ranges a few times.

Fig. 30

Fig. 31

MAINTENANCE

1 2 ... 10 11 12 13 14 15 16

No comments

Delta DP250 Instruction Manual Page 15