Delta DP250 Instruction Manual download pdf (Page 6)

DRILL PRESS PARTS

Fig. 1

1 - Drill Press Head and Motor

2 - Column, Base Flange, and Rack

3 - Table

4 - Base

Fig. 2

5 - Chuck

6 - Clamp Handle

7 - Pinon Shaft Handles (3)

8 - Table Raising and Lowering Handle

9 - M8x1.25x125mm Carriage Head Screws (2),

8.5mm Flat Washers (2), 8.5mm Lock Washers (2),

M8x1.25 Hex Nuts (2), (for fastening the base to a

supporting surface)

10 - Worm Gear for Table Raising and Lowering Mechanism

11 - Wrenches (one 3mm and one 5mm)

12 - M8x1.25x25mm Hex Head Cap Screws (4)

13 - Chuck Key

Fig. 2

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

No comments

Delta DP250 Instruction Manual Page 6