Delta 36-322L Operations Instructions download pdf (Page 8)

THE WOOD POST 1514 Summer 2006

the right tools

JT360 6-inch deluxe jointer

Ensure that your wood surfaces are flat with this deluxe jointer (#60009).

The

⁄4-hp model features a 4

⁄8- x 35-inch fence that mounts in the center

for maximum work support and tilts for beveling and chamfering operations. It

also includes a heavy-gauge steel stand and wide footprint for sturdy support

and a built-in dust chute to direct dust and chips away from the operator. The

safety cutterhead guard pivots out of the way of work during operation. The 46-inch-

long table can handle extra-long stock. The equipment features a cast-iron wedge

bed for solid support, and fully adjustable infeed and outfeed tables that operate on

gibbed dovetailed ways to compensate for wear. The infeed table also has a cast-

iron, 8

⁄4- x 3-inch support ledge for rabbeting operations.

JT160 ShopMaster 6-inch variable-speed bench jointer

This jointer (#33781) has variable speed ranges of 6,000 to 11,000

revolutions per minute (rpm), or 12,000 to 22,000 cuts per minute

(cpm). It allows you to select the correct speed for the size and

hardness of the material that you cut. The center-mounted

fence gives support throughout the cut for accurate edge

jointing. The fence tilts 0 to 45 degrees outward for bevel

jointing and chamfering and features positive stops at

45 and 90 degrees. The Poly V belt drive offers maximum

transmission of power to the cutterhead with minimum belt slippage.

Balanced for smooth operation and a maintenance-free life, the two-

knife cutterhead has a jackscrew-knife leveling arrangement for easy

replacement and adjustment of individual knives. The built-in chip

chute directs dust and chips away from the operator, motor, and electrical

components, while the extra-large table provides ample work support for

surfacing stock up to 6 inches wide.

Planers and Jointers

TP305 ShopMaster 12

⁄2-inch portable planer

Follow up your surfacing efforts with this portable planer (#36274). The

powerful 15-amp, 120-volt motor offers superior stock removal. The two-

knife, quick-change, solid-steel cutterhead is mounted on ball bearings for

smooth operation and long life, and high-speed steel, two-edge/reversible

knives double the cutting life. The patented cutterhead elevation on four

precision-ground columns offers superior cut stability. The planer includes a

convenient wood-return roller and adjustable infeed and outfeed tables.

Fence Systems

These offer a three-point T-square locking system with a hairline pointer to assure that the fence is

parallel to the blade and accurate to within

⁄64 inch. All three of these fence systems fit the 36-979

Industrial Contractor’s Saw (#237665).

36-U30 Unifence fence system

The Unifence system (#237666) includes the fence, rail, leg set,

adjustable stop, and 14-inch-wide tableboard. The dual-position fence

rotates from 3

⁄3-inch-tall stock to

⁄2-inch-thin stock for maximum versatility of

materials, including laminated boards that overhang the fence. At 43 inches long,

the fence can be positioned forward of the blade to align large panels better during ripping

and to function as a stop for repetitive crosscuts. The infinitely adjustable stop, with flip-

down bypass, positions the fence at preset measurements for fast and consistent fence

adjustments. The tableboard offers 30 inches of material support to the right of the blade.

36-B30 Biesemeyer 30-inch commercial fence system

The Biesemeyer system (#237671) includes the fence, rail, leg set, and 14-

inch-wide tableboard. It has a rugged construction of high-impact laminated

birch plywood that is hand-fitted to the solid-steel angle iron and tubing for years of

continuous use. The fence and head are made of heavy-gauge steel for lifelong accuracy

with no deflection.

36-T30 T2 30-inch fence system

The face of the T2 fence (#237669) is made from extruded

aluminum and attaches to the solid-steel angle iron and tubing

for years of durability. The fence clamps to both the front tube and

rear rail of your table saw to accommodate various fence attachments.

The easy-gliding fence body can handle quick, repetitive cutoff work, precision

ripping, and squaring cuts. The fence also can be removed quickly for placement

on either side of the blade for consistent ripping on left or right tilt saws. It includes

an additional rear hold-down support for use with jigs and featherboards.

NEW

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Delta 36-322L Operations Instructions Page 8

Comments to this Manuals

Related products and manuals for Circular saws Delta 36-322L