Delta 36-322L Operations Instructions download pdf (Page 9)

THE WOOD POST 1716 Summer 2006

the right tools

Drill Press and Accessories

DP300L 12-inch bench drill press with laser

Featuring a

⁄3-hp, 120-volt induction motor for long-lasting, smooth performance, this drill

press (#99686) has a pivoting motor mount that maintains correct belt tension and facilitates

speed changes. The three-spoke pilot wheel offers convenience for the operator, and the

adjustable-position, locking depth stop allows for accurate depth measurement and repeti-

tive drilling. The tilting table features slots for fast clamping of workpieces. The standard three-

jaw,

⁄2-inch-capacity chuck provides positive gripping of various drill press cutting tools. Laser-guided

operation provides unparalleled accuracy.

17-940 25-piece sanding drum kit

This kit (#237677) converts a drill press for use as a sander. It includes five drums with

⁄2-,

⁄4-, 1-, 1

⁄2-, and 2-

inch diameters and fits drill presses with

⁄4-inch and larger chucks. The kit comes in a carrying case with

two sets each of 80- and 120-grit sanding sleeves.

Scroll Saw

SS350LS Industrial 16-inch variable-speed scroll saw with leg set

This scroll saw (#178013) offers a heavy-duty, 2-amp, 120-volt induction motor. The

patented upper and lower blade chucks feature the Quickset II Blade Chuck System

for quick, tool-free blade changes. The teardrop-shaped, cast-iron table tilts 0 to 45

degrees and extends the full length of the throat for maximum workpiece support. The

variable speed control of 600 to 1,650 cutting strokes per minute (cspm) is designed

for cutting wood, metal, and plastics. A built-in air blower keeps the cutting line free of

dust, and the saw includes a removable dust-collection box with a 1

⁄2-inch dust port.

Also included are a convenient carrying handle and blade storage area.

Miter Saw

36-322L Industrial TwinLaser 12-inch compound miter saw

The TwinLaser cut lines show both sides of the blade kerf when the blade is rotating

or at rest. The saw (#180361) features a large rear-blade access for cutting base-

board, vertically, up to 6 inches or crown molding up to 5

⁄4 inches. The saw comes

with a high-quality carbide-tipped 12-inch blade and features a 15-amp, 3,500-rpm

motor for maximum cutting power. The front bevel lock has adjustable positive stops

at 0, 33.9, and 45 degrees left and a large readable scale that makes it easy

to accomplish quick and accurate compound cuts. The quick-action, cam-

lock miter knob has nine positive detents and a large chemically etched

scale for maximum accuracy and ready adjustability. The saw also features

a large, stainless-steel detent plate for durability.

Belt/Disc Sander

31695 6-inch belt/9-inch disc sander

This sander (#201452) features a 1-hp, 120-volt induction motor that is completely

enclosed for protection against dust. The belt unit is adjustable so that the sander can

operate vertically, horizontally, and at in-between angles, and the belt guard removes

to allow for contour sanding. The 9-inch disc is perfect for sanding large curves or

rounding out sharp corners. The cast-aluminum table can tilt 45 degrees for bevel

sanding, and it accommodates either the belt or disc unit. A belt-tracking knob

provides tool-free belt alignment, and a belt-tensioning lever loosens and tightens

the belt instantly for quick belt changes. The sander also features a 2

⁄4-inch-

diameter dust outlet for adaptation to a dust-collection system or shop vacuum.

28-276 Industrial 14-inch band saw with stand

This model (#59964) has a capacity of 13

⁄4 inches from frame to blade and features a

⁄4-hp,

120-volt motor that is ideal for contour cutting, straight cutting, and resawing operations. It

features the Rapid-Release tension lever and a nine-spoke wheel. The 16- x 16-inch cast-iron

table tilts 3 degrees left and 45 degrees right for beveling operations. The lower blade guides

will angle to support the blade to within

⁄4 inch of the table work surface to ensure accurate

cutting. The saw includes a 4-inch integral dust port.

Band Saws

Minimize waste and maximize efficiency with band saws from Delta.

Create both curved and straight lines with these versatile machines.

BS150LS 10-inch band saw with stand

This band saw (#33307) features a heavy-duty,

⁄2-hp

ball-bearing motor and upper and lower tire brushes

for improved blade tracking. The cast-iron frame and

table offer improved stability, and the large, two-wheel

design extends blade life. The rack and pinion table-

tilt adjustment positions the table at any angle from 3

degrees left to 45 degrees right, and the upper-blade

guide adjustment allows for precise height positioning.

The band saw has a maximum capacity of 10 inches

from frame to blade.

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Delta 36-322L Operations Instructions Page 9

Comments to this Manuals

Related products and manuals for Circular saws Delta 36-322L