Delta 14-650 Instruction Manual download pdf (Page 16)

USING BITS WITH EXTRA LONG SHANKS

Fig. 38

Fig. 37

When using bits with extra long shanks, it will be

necessary to remove the extension (A) Fig. 37. This can be

accomplished by inserting screwdriver into center hole

of motor end cap (B) Fig. 38, and into slot in end of

armature shaft. Then using chuck key, unscrew and

remove chuck (C) Fig. 37, and extension (A). Remove

extension (A) from chuck (C) and replace chuck (C) on

end of motor shaft.

1 2 ... 11 12 13 14 15 16 17 18

No comments

Delta 14-650 Instruction Manual Page 16