Delta 37-071 Instruction Manual download pdf (Page 8)

Compare all parts to the list below and check that all parts are present and in good condition. Report any missing

or damaged parts to your distributor or dealer. Prior to tool assembly and use, read this manual thoroughly to

familiarize yourself with proper assembly, maintenance and safety procedures.

PRODUCT SPECIFICATIONS

UNPACKING

DESCRIPTION (QUANTITY)

1. 37-071 6” Jointer (1)

2. Fence

3. Rear Fence Support (1)

4. Rear Fence Bracket (1)

5. Dovetail Clamp (1)

6. Indexing Handle (1)

7. Fence Mounting Plate (1)

8. Fence Angle Lock (1)

9. 45°/90° Angle Stop (1)

10. Hardware Package (1)

11. 4 mm Hex Wrench (1)

12. 6 mm Hex Wrench (1)

13. Push Blocks (2)

14. Operator’s Manual (not shown)

CONTENTS OF

HARDWARE PACK

• M8 x 16mm Hex Head Screws (4)

• M8 x 20mm Hex Head Screws (2)

• 8mm Lock Washers (6)

Weight 76 lbs

Overall Dimensions (L x W x H) 26 x 8 x 10 in.

Table Dimensions (L x W) 28-1/2 in. x 6-¼ in.

Motor

12 amps

110V

Single-Phase

60 Hz

Maximum Width of Cut 6 in.

Maximum Depth of Cut 1/8 in.

Number of Knives 2

Cuts per Minute 20,000

Fence Length 22-7/8 in.

Fence Height 4-5/16 in.

Fence Angle 90° and 45°

Cutterhead Diameter 1-7/8 in.

Cutterhead Speed 10,000 RPM

4 5 6 7

8 9 10 11 12 13

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 55 56

Comments to this Manuals

No comments

Delta 37-071 Instruction Manual Page 8

Comments to this Manuals

Related products and manuals for Power tools Delta 37-071