Delta 43-355 Instruction Manual download pdf (Page 15)

STARTING PIN

1. Your machine is supplied with a tapered starting pin

which is used as a support when starting the cut. The

start-ing pin is placed in one of the two tapered holes in

the table depending on the rotation of the cutter.

2. The work should be placed in the first position using

the guide pin as a support, as shown in Fig. 46. Then

swing the work into the cutter as shown in the second

position. The work will now be supported by the collar

and starting pin as shown in Fig. 46.

3. After the cut has been started, the work is swung

free of the starting pin and rides only against the collar

as shown in the third position Fig. 47. ALWAYS FEED

AGAINST THE ROTATION OF THE CUTTER.

IMPORTANT: If the work would be advanced to the

cutter without the side support of the starting pin, it

would invariably be kicked back.

Fig. 46

Fig. 47

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers,

and Delta Authorized Service Stations. Please visit our Web Site

www.deltamachinery.com for a catalog or

for the name of your nearest supplier.

WARNING: Since accessories other than those offered by Delta have not been tested

with this product, use of such accessories could be hazardous. For

safest operation, only

Delta recommended accessories should be used with this product.

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network

of Porter-Cable • Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional

information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location

of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Two Year Limited Warranty

Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine accessory which

in normal use has proven to be defective in workmanship or material, provided that the customer returns the product

prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two

years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. Delta may require that

electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement.

Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or

alteration made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under

no circumstances will Delta be liable for incidental or consequential damages resulting from defective products. This

warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all

other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly

disclaimed by Delta.

1 2 ... 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Delta 43-355 Instruction Manual Page 15

Comments to this Manuals

Related products and manuals for Power tools Delta 43-355