Delta 18-900L Use and Care Manual download pdf (Page 13)

OPERATIONAL CONTROLS AND

ADJUSTMENTS

OPERATION

Fig. 25

Fig. 24

Firmlytightenlocknut(LL)witha10mmwrench.

STARTING AND STOPPING 18-900L

To reduce the risk of injury, make sure

that the ON/OFF switch is in the "OFF" position before

plugging cord into outlet. Do not touch the plug’s

metal prongs when unplugging or plugging in the cord.

Toturn drillpresson, liftswitchpaddle (KK)Fig. 24 up

tothe"ON" position.Toturn drill pressoff,push switch

paddle(KK)Fig.25downtothe"OFF"position,asshown.

LOCKING SWITCH IN THE "OFF" POSITION

To reduce the risk of injury, in the event

of a power outage (such as a breaker or fuse trip),

always move the switch to the “OFF” position until

the main power is restored.

IMPORTANT: When the machine is not in use, the

switchshouldbe lockedin the "OFF"position toprevent

unauthorizeduse,usingapadlockthroughholesat(LL)Fig.

25.The minimumshacklediametershould be 1/5" (5mm)

andminimumshacklelengthshouldbe7/8”(22.2mm).

Fig. 26

TURNING ON WORK LIGHT AND LASERS

Push"LASER"button(MM) Fig.26toturn onorturnoff

the crosshair lasers.

Push"LIGHT"button(NN)Fig.26toturnonorturnoffthe

LED work light.

TABLE TILT POINTER

Lock the forward tilt knobs with the table rmly against

thesetscrew(Y1)Fig.23D.

Placethe lockwasherunder thescrewhead (Z1)Fig.

23E, then washer and then pointer. Align the indicator

line on the pointer with 0° mark on the scale and tighten

securelywithsuppliedhexwrench.

Fig. 23D

Fig. 23E

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 67 68

No comments

Delta 18-900L Use and Care Manual Page 13