Delta 28-348 Instruction Manual download pdf (Page 16)

ON / OFF SWITCH

TO STAND

1. Remove the two outer hex nuts and lock washers (A)

Fig. 34 from the switch box (B).

Fig. 34

2. Insert two screws (C) Fig. 35, located on back of

switch box, into two holes (D) located in the band saw

arm.

Fig. 35

3. Use the two nuts and lockwashers (L) Fig. 36,

removed in STEP 1, to fasten the switch box to the

bandsaw arm.

Fig. 36

4. Remove the screw and cable clamp (E) Fig. 37 from

the lower arm of the band saw.

5. Insert the switch cord and power cord (F) Fig. 37

into the clamp (E), and fasten to the bandsaw.

Fig. 37

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

No comments

Delta 28-348 Instruction Manual Page 16