Delta 32-325 Instruction Manual download pdf (Page 7)

EXTENSION CORDS

Use proper extension cords. Make sure

your extension cord is in good condition and is a 3-wire

extension cord which has a 3-prong grounding type

plug and matching receptacle which will accept the

machine’s plug. When using an extension cord, be sure

to use one heavy enough to carry the current of the

machine. An undersized cord will cause a drop in line

voltage, resulting in loss of power and overheating. Fig.

D-1 shows the correct gauge to use depending on the

cord length. If in doubt, use the next heavier gauge. The

smaller the gauge number, the heavier the cord.

Fig. D-1

MINIMUM GAUGE EXTENSION CORD

RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES

Ampere Total Length Gauge of

Rating Volts of Cord in Feet Extension Cord

0-6 120

up to

25 18 AWG

0-6 120 25-50 16 AWG

0-6 120 50-100 16 AWG

0-6 120 100-150 14 AWG

6-10 120

up to

25 18 AWG

6-10 120 25-50 16 AWG

6-10 120 50-100 14 AWG

6-10 120 100-150 12 AWG

10-12 120

up to

25 16 AWG

10-12 120 25-50 16 AWG

10-12 120 50-100 14 AWG

10-12 120 100-150 12 AWG

12-16 120

up to

25 14 AWG

12-16 120 25-50 12 AWG

12-16 120

GREATER THAN 50 FEET NOT RECOMMENDED

FOREWORD

FUNCTIONAL DESCRIPTION

The Delta Model 32-325 line boring machine comes with a large 16" x 29-3/4" table that provides a work space for

boring large boards.

NOTICE: The photo on the manual cover illustrates the current production model. All other illustrations

contained in the manual are representative only and may not depict the actual color, labeling, or accessories,

and are intended to illustrate technique only.

CARTON CONTENTS

1 - Boring Machine

2 - Fence

3 - Table

4 - Clear Plastic Guard

5 - Operating Handle

6 - Table Brackets

7 - Wrench

8 - Gauge for Aligning Fence to Drill Head

9 - Table Bracket Slides (4)

10 - Spacers (2)

11 - 1/4" Flat Washers (2)

12 - 1/4" Lockwashers (2)

13 - 1/4-20 x 1-1/2" Hex Screws (2)

14 - Table Lock Knobs (2)

15 - 5/16" Flat Washers (2)

16 - 5/16-18 x 3/4" Carriage Bolts (2)

17 - 1/4-20 Hex Lock Nuts (4)

18 - 1/4-20 x 1-1/4" Flat Head Screws (4)

19 - 5/16-24x1/4" Hex Set Screws (13)

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comments to this Manuals

No comments

Delta 32-325 Instruction Manual Page 7

Comments to this Manuals

Related products and manuals for Power tools Delta 32-325