Delta 23-710 Instruction Manual download pdf (Page 2)

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS

Read all warnings and operating instructions before using any tool or equipment. When

using tools or equipment, basic safety precautions should always be followed to reduce the risk of

personal injury. Improper operation, maintenance or modification of tools or equipment could result in

serious injury and property damage. There are certain applications for which tools and equipment are

designed. Delta Machinery strongly recommends that this product NOT be modified and/or used for any application

other than for which it was designed.

SAFETY GUIDELINES - DEFINITIONS

If you have any questions relative to its application DO NOT use the product until you have written Delta Machinery and

we have advised you. Contact us online at www.deltaportercable.com or by mail at Technical Service Manager, Delta

Machinery, 4825 Highway 45 North, Jackson, TN 38305. In Canada,125 Mural St. Suite 300, Richmond Hill, ON, L4B 1M4)

Information regarding the safe and proper operation of this tool is available from the following sources:

 • PowerToolInstitute,1300 Sumner Avenue, Cleveland, OH 44115-2851or online at www.powertoolinstitute.org

 • NationalSafetyCouncil, 1121 Spring Lake Drive, Itasca, IL 60143-3201

 • AmericanNationalStandardsInstitute, 25 West 43rd Street, 4 floor, New York, NY 10036 www.ansi.org - ANSI 01.1

Safety Requirements for Woodworking Machines

 • U.S.DepartmentofLabor regulations www.osha.gov

SAVE THESE INSTRUCTIONS!

It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY

and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious

injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious

injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate

injury.

Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided,

may result in property damage.

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities

contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• leadfromlead-basedpaints,

• crystallinesilicafrombricksandcementandothermasonryproducts,and

• arsenicandchromiumfromchemically-treatedlumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, al ways

wear NIOSH/OSHA approved, properly fit ting face mask or res pi ra tor when us ing such tools.

IMPORTANT SAFETY INSTRUCTIONS ....................2

SAFETY GUIDELINES - DEFINITIONS .....................3

GENERAL SAFETY RULES .......................................4

ADDITIONAL SPECIFIC SAFETY RULES ................5

FUNCTIONAL DESCRIPTION ...................................6

CARTON CONTENTS ...............................................6

ASSEMBLY .................................................................7

OPERATION ...............................................................12

TROUBLESHOOTING ................................................20

MAINTENANCE ..........................................................20

SERVICE .....................................................................21

ACCESSORIES ...........................................................21

WARRANTY ................................................................21

FRANÇAIS ..................................................................22

ESPAÑOL ....................................................................42

1 2 3 4 5 6 7 ... 63 64

Comments to this Manuals

No comments

Delta 23-710 Instruction Manual Page 2

Comments to this Manuals

Related products and manuals for Power tools Delta 23-710