Delta 23-710 Instruction Manual download pdf (Page 20)

Fig. 58

REPLACING WET GRINDING WHEEL

DISCONNECT THE MACHINE FROM

THE POWER SOURCE.

1. Using the wrench (A) Fig. 58, supplied, remove the

wheel locking nut (B).

2. Remove and replace the wet wheel (C) as shown in

Fig. 59.

Fig. 59

Fig. 60

Fig. 62

REPLACING DRY GRINDING WHEEL

DISCONNECT MACHINE FROM THE

POWER SOURCE.

1. Remove three screws (A) Fig. 60, and side cover (B).

2. Using wrench (C) Fig. 61, supplied, hold motor shaft

on inside of grinding wheel (D) to keep shaft from

turning and remove wheel nut (E). Use a 13/16

wrench (not provided).

3. Remove grinding wheel (D), as shown in Fig. 62.

Fig. 61

1 2 ... 15 16 17 18 19 20 21 22 23 24

No comments

Delta 23-710 Instruction Manual Page 20