Delta 23-710 Instruction Manual download pdf (Page 21)

Fig. 63

DRESSING THE DRY GRINDING

WHEEL

A stick type dresser (A) Fig. 63, is supplied with your

sharpening center to dress the dry grinding wheel. Bring

the dresser stick (A) forward on the tool rest until it just

touches the high point of the face of the wheel and dress

the wheel by moving the dresser stick back and forth.

Repeat this operation until the face of the wheel is clean

and the corners of the wheel are square.

MAINTENANCE

KEEP MACHINE CLEAN

Periodically blow out all air passages with dry compressed

air. All plastic parts should be cleaned with a soft damp

cloth. NEVER use solvents to clean plastic parts. They could

possibly dissolve or otherwise damage the material.

Wear ANSI Z87.1 safety glasses while

using compressed air.

FAILURE TO START

Should your machine fail to start, check to make sure the

prongs on the cord plug are making good contact in the

outlet. Also, check for blown fuses or open circuit breakers

in the line.

1 2 ... 16 17 18 19 20 21 22 23 24

No comments

Delta 23-710 Instruction Manual Page 21