IQ 100 Series (130/140/150) Meter
Mechanical Installation
20 User and Installation Manual IM02601003E-September 2011 www.eaton.com
ANSI Installation Steps
1. Insert 4 threaded rods by hand into the back of the meter. Twist until secure.
2. Slide ANSI 12 Mounting Gasket onto the back of the meter with rods in place.
3. Slide the meter with Mounting Gasket into the panel.
4. Secure from back of panel with lock washer and nut on each threaded rod.
Use a small wrench to tighten. Do not overtighten.
The maximum installation torque
is 0.4 Newton-Meter.
NEMA 12 Mounting Gasket
Threaded Rods
Lock Washer and Nut
Comments to this Manuals