Delta 36-714B Instruction Manual Page 42
- Page / 48
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
42
CONSTRUCTING A FEATHERBOARD
Fig. 148, illustrates dimensions for making a typical featherboard. The material which the featherboard is constructed
of, should be a straight piece of wood that is free of knots and cracks. Featherboards are used to keep the work in
contact with the fence and table and help prevent kickbacks. Clamp the featherboards to the fence and table so that
the leading edge of the featherboards will support the workpiece until the cut is completed. Use featherboards for all
non “thru-sawing” operations wher
e the guard and spreader assembly must be removed (see Fig. 149). Always replace
the guar
d and spreader assembly when the non thru-sawing operation is completed.
Fig. 148
Fig. 149
Kerf should be
about 1/4" apart.
BLADE GUARD ACCESSORIES
Deluxe Uniguard
®
Blade Guard
The Delta Model 34-976 Uniguard Blade Guard with
Splitter and Anti-kickback Fingers Fig. 150, is an
accessory that can be used in place of the standard
blade guard that is supplied with the Unisaw. The Delta
Model 34-976 Uniguard Blade Guard can be mounted to
the Unisaw, the Unisaw with a 52" Unifence, or 30"
Unifence.
78-953 Uniguard Strap Kit. Kit replaces the rear angle
rail of Biesemeyer 30" and 50" Commercial Fence
Systems and Home Shop Fence Systems up to 52" for
mounting the No. 34-976 Delta Uniguard Blade Guard.
Mounting hardware included.
Fig. 150
Biesemeyer
®
T-Square
®
Table
Saw Blade Guard System
The Biesemeyer Model 78-960 Biesemeyer T-Square
Table Saw Blade Guard System Fig. 151, is an accessory
that can be used in place of the standard blade guard
that is supplied with the Unisaw.
Catalog Listing Blesemeyer T-Square Blade Guard
Systems
78-960 10" System for Home Shop 52" and Commercial
50" Fence Systems. With T-arm assembly, blade guard,
splitter, installation bracket, mounting hardware and
instruction manual.
78-955 10" System for Home Shop 28", 40" and
Commercial 26", 30" and 38" Fence Systems. Same as
78-960 except for fence systems 40" and under.
Fig. 151
- (Model 36-842) 1
- (Model 36-844) 1
- (Model 36-845) 1
- GENERAL SAFETY RULES 2
- SAVE THESE INSTRUCTIONS 3
- Refer to them often 3
- POWER CONNECTIONS 4
- MOTOR SPECIFICATIONS 4
- GROUNDING INSTRUCTIONS 4
- OPERATING INSTRUCTIONS 5
- 50" COMMERCIAL 8
- BIESEMEYER FENCE SYSTEM 8
- & OUTFEED TABLE 8
- INSTRUCTIONS 9
- ASSEMBLING ON/OFF 10
- ASSEMBLING BLADE 10
- GUARD AND SPLITTER 10
- ASSEMBLY 10
- HOLDER BRACKETS 13
- MOTOR COVER 13
- ASSEMBLING RIP FENCE 13
- 52" UNIFENCE 14
- ASSEMBLING UNIFENCE 18
- GUIDE RAIL TO TABLE 18
- FLIP STOP 19
- SETTING FLIP STOP 20
- ASSEMBLING CURSOR TO 20
- UNIFENCE BODY 20
- BODY TO GUIDE RAIL 21
- ASSEMBLING FENCE TO 22
- FENCE OPERATION 22
- RIPPING WITH THE 23
- UNIFENCE 23
- ADJUSTING FENCE PARALLEL 24
- TO MITER GAGE SLOTS 24
- ADJUSTING FENCE 90 24
- DEGREES TO TABLE 24
- ADJUSTING CLAMPING 25
- ACTION OF FENCE 25
- LOCKING HANDLE 25
- RIPPING ON LEFT SIDE OF 25
- SAW BLADE 25
- USING THE FENCE AS A 26
- CUT-OFF GAGE 26
- USING AUXILIARY WOOD 26
- FACING ON THE UNIFENCE 26
- ASSEMBLING GUIDE RAILS 27
- ASSEMBLING TABLE LEGS 28
- TO EXTENSION TABLE 28
- ASSEMBLING EXTENSION 29
- TABLE TO FRONT AND REAR 29
- REAR SUPPORT TABLE 30
- MOUNTING INSTRUCTIONS 30
- FOR MODEL 36-845 ONLY 30
- FENCE LUBRICATION 32
- OPERATING CONTROLS 34
- AND UNISAW ADJUSTMENTS 34
- ADJUSTING 90 AND 45 35
- DEGREE POSITIVE STOPS 35
- ADJUSTING TABLE 35
- ADJUSTING TABLE INSERT 36
- MITER GAGE OPERATION 36
- AND ADJUSTMENT 36
- MAINTENANCE 37
- OPERATIONS 38
- USING ACCESSORY 39
- MOULDING CUTTERHEAD 39
- DADO HEAD 40
- FACING ON RIP FENCE 41
- BLADE GUARD ACCESSORIES 42
- ACCESSORIES 43
- PUSH STICK 44
- Printed in U.S.A 48
Related products and manuals for Power tools Delta 36-714B
Power tools Delta 28-195 Instruction Manual
(21 pages)
(21 pages)
Power tools Delta 28-185 Specifications
(15 pages)
(15 pages)
Power tools Delta 33-892 Instruction Manual
(84 pages)
(84 pages)
Power tools Delta 40 Instruction Manual
(16 pages)
(16 pages)
Power tools Delta MM300 Instruction Manual
(18 pages)
(18 pages)
Power tools Delta 36-540 Instruction Manual
(22 pages)
(22 pages)
Power tools Delta DP115 Instruction Manual
(16 pages)
(16 pages)
Power tools Delta 28-150 Instruction Manual
(24 pages)
(24 pages)
Power tools Delta 14-650 Instruction Manual
(18 pages)
(18 pages)
Power tools Delta 11-950 Instruction Manual
(14 pages)
(14 pages)
Power tools Delta MS150 Instruction Manual
(17 pages)
(17 pages)
Power tools Delta 20-330 Instruction Manual
(24 pages)
(24 pages)
Power tools Delta 37-070 Instruction Manual
(21 pages)
(21 pages)
Power tools Delta 37-285 Owner's Manual
(23 pages)
(23 pages)
Power tools Delta 36-070 Instruction Manual
(21 pages)
(21 pages)
Power tools Delta 28-293 Instruction Manual
(16 pages)
(16 pages)
Power tools Delta 36-650 Instruction Manual
(32 pages)
(32 pages)
Power tools Delta 28-299A Instruction Manual
(16 pages)
(16 pages)
Power tools Delta 43-459 Instruction Manual
(16 pages)
(16 pages)
© 2020, manymanuals.com. All rights reserved. | 1.703 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals