14
ASSEMBLY INSTRUCTIONS FOR MODEL 36-842
52" UNIFENCE
Fig. 35
1. Fig. 35 shows the hole location for mounting the
Unifence table legs to the table board.
2. Lay the table upside down on the floor or bench, as
shown in Fig. 36.
Fig. 36
ASSEMBLING UNIFENCE
TABLE AND SHELF BOARD
ASSEMBLING DUST CHUTE
ADAPTER
The Unisaw is supplied with a dust chute connector to
provide a means of connecting a dust collector to the
machine. Align the four holes in the dust chute adapter
(A) Fig. 34A,with the four holes in the back of the saw
cabinet (B) and attach the dust chute adapter with four
#10 x 1/2" sheet metal screws.
Fig. 34A
A
B
Comments to this Manuals